Franges and consoles

The franges serves to transfer loads from the installed metal lighting support to the foundation block.

Depending on the type of load taken, the franges are made with square flanges with 4 holes (type K), or with round flanges with more than 4 holes (type D).

Parts of the embedded element that structurally protrude from the foundation block are protected from corrosion in accordance with the requirements of SNiP 2.03.11 and GOST 9.602, which ensures their long service life.

Upon request, the embedded foundation part can have all external surfaces coated with bitumen mastic or hot-dip galvanized in accordance with GOST. 9.307-89.

Consoles and cantilever embedded parts are used to transfer loads from the installed support to the foundation block. They have a load-bearing part designed for installation in a foundation block, and a horizontal flange for installing a metal lighting support. Straight cantilever elements have two spaced apart fastening points (flanges with holes) and are designed for installation together with a embedded element.

Correspondence

GOST 9.307-89 Unified system of protection against corrosion and aging. Hot zinc coatings. General requirements and control methods
GOST 9.602-2016 Underground structures. General requirements for corrosion protection
SNiP 2.03.11 Protection of building structures from corrosion

If you need to select suitable embedded parts for supports, then you need to fill out a form, based on which we will produce the products you require.

Characteristics

Serve to

transfer loads to the foundation block

Protection

Protected from corrosion according to SNiP 2.03.11 and GOST 9.602