ПН - Опоры несиловые трубчатые разборные

This pole type is intended for lighting of any objects.

More details

Additional options are available

ПН - Опоры несиловые трубчатые разборные

This pole type is intended for lighting of any objects.

Details

We offer comprehensive solutions in the field of construction and reconstruction of road facilities. Our specialists are always ready to answer your questions.

Poles of this series are designed for utilitarian lighting of any objects. Bracket arms and lighting fixtures can be mounted on the poles. Bracket arms and lighting fixtures can be mounted on the poles. It is strictly prohibited to use this type of poles as load-bearing.

climatic regions - II4...II11 according to GOST 16350;
windy regions - from I to VII according to SP 20.13330.2016;
external environment - mildly aggressive (by degree of aggressive impact) according to SNiP 2.03.11. The use of poles under other conditions is possible, but must be validated by the project and agreed upon with the manufacturer.

Benefits

High-quality sheet metal from leading Russian manufacturers is used as a material. The material is selected depending on the climatic region of operation according to SP 16.13330.2011 with the safety factor taken into account.
Anti-corrosive coating is applied by hot-dip galvanizing in full compliance with GOST 9.307-89, which ensures the preservation of the product for 25-30 years of operation.
The pole has a low weight, which facilitates its delivery and installation.
Above the handhole there is a special cover that ensures safe maintenance of the pole in rainy weather.
The pole can be treated with a decorative paint coating (this needs to be specified when ordering, please ask the supplier for details) in accordance with GOST 9.032 requirements.

Light poles

Pole installation. The FN pole type is mounted on reinforced concrete foundations, which include an embedded element. Embedded elements must be ordered separately. Main parameters of the foundation are calculated based on climatic conditions of the operating area and soil parameters.

Equipment installation. The pole allows installation of bracket arms with luminaires. Threaded holes are provided in the upper part of the pole for attaching bracket arms. For this pole type, buried power cables are fed through the apertures of the embedded element (type FN). For wiring preparation there are handholes with planks for installing components and an earthing point (M10 bolt).

Light poles are selected by height, by type of luminaire installed, and by appearance (when decorative properties are required). Given the purpose of this pole type, some restrictions are introduced on strength characteristics, which are given below. They have wind zones indication according to SP 20.13330.2016 "Loads and effects". The listed restrictions are maximum, i.e., any bracket arms with heights and lengths less than those indicated or equal to them can be installed on the poles.

This pole type allows the installation of:

bracket arms with length up to 2 m with two luminaires and with length up to 1.5 m with four luminaires in wind operation zones up to the II inclusive;
bracket arms with length up to 2m with one luminaire in wind zones up to the IV inclusive;
other equipment (cellular antennas, advertising constructions, and so on).

It is possible to use these poles as intermediates for SIP suspension, with mandatory agreement with the pole manufacturer. The use of poles as intermediates for SIP suspension, as well as being used in wind operation zones V and above, climatic zones I4...II3 must be project-validated and agreed upon with the manufacturer.

Since poles and suitable equipment for them are complex technical products, the parameters of which significantly depend on operating conditions, type and placement of load on the crown, each type of masts requires filling in the Terms of Reference.

Back to the list